VPU III SO LD+A
VPU III SO LD+A
Electric symbol
Schematic circuit diagram

VPU III SO LD+A

Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase

Product ID 1351700000
Gegevensblad downloaden Product Downloads Engineering Support
Verwante producten 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Classifications Tender specification sheets

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, without telecomm. contact, Single-phase 
Order No.
1351700000 
Type
VPU III SO LD+A 
GTIN (EAN)
4050118158458 
Qty.
1 items

Dimensions and weights

Depth
25 mm
Depth (inches)
0,984 inch
Height
35 mm
Height (inches)
1,378 inch
Width
12 mm
Width (inches)
0,472 inch
Net weight
34 g

Temperatures

Storage temperature
-40 °C...80 °C 
Operating temperature
-25 °C...55 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
Miscellaneous 
Cross-section for connected wire, solid core, max.
1,5 mm²
Cross-section for connected wire, solid core, min.
0,25 mm²

General data

Acoustic signal
Yes 
Colour
black 
Design
Flush mounting 
Operating altitude
≤ 4000 m 
Optical function display
Green LED = OK 
Red LED = arrester is defective 
replace 
Protection degree
IP20 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
without telecomm. contact 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
II 

Rated data IEC / EN

Acoustic signal
Yes 
Combined pulse UOC
3 kV
Discharge current (type III)
3 kA
Energy coordination (≤10 m)
Type II 
Type III 
Frecuencia de red a 250 Vmáx.
50...60Hz 
Frequency range, min.
50 Hz
Integrated back-up fuse
No 
Leakage current at Un
30 µA
Low voltage network
Single-phase 
Max. continuous voltage, Uc (AC)
275 V 
PE conductor current IPE
10 µA
Protection level Up at IN (L/N-PE)
≤ 1.5 kV 
Protezione
16 A 
Pólusszám
2 
Rated voltage (AC)
230 V
Requirements category acc. to IEC 61643-11
Type III 
Requirements class, acc. to EN 61643-11
T3 
Rövid idejű túlfeszültség (feszültségcsúcs) – TOV
440 V
Short-circuit current rating ISCCR
1,5 kA
Signalling contact
No 
Standards
IEC 61643-11 
EN 61643-11 
Type de tension
AC 
Zakres częstotliwości, maks.
60 Hz
반응 시간/대체 시간
<100μs 

Connection data

Stripping length
10 mm
Wire cross-section, solid, min.
0,25 mm²
Wire connection cross section, finely stranded, max.
25 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
2 
Protection degree
IP20 
Colour
black 

Guarantee

Time interval
5 years 

Classifications

ETIM 8.0
EC000942 
ETIM 9.0
EC000942 
ETIM 10.0
EC000942 
ECLASS 14.0
27-17-12-03 
ECLASS 15.0
27-17-12-03 

Tender specification sheets

Long specification
Surge protection according to the requirements of Class III in accordance with IEC 61643-11, EN61643-11:2013. The arrestor serves as surge protection and is used in applications in accordance with IEC 61643-12. The arrestor is installed in the vicinity of the equipment that needs protection in a standard installation/distributor housing. The VPU III SO LD +A is earthed between the phase and the neutral conductor. With thermal separation device on the varistor. If there is no longer any protection, the red LED goes out and an acoustic signal sounds. Rated voltage: 230 VAC In/max (8/20 µs): 1.5 kA protection level < 1.5 kV Type: Weidmüller VPU III R SO LD A Order No. 1351700000 or equivalent 
Short specification
Class III arrester with Uoc: 3 kV suitable for 230 V AC mains systems. Protection level < 1.5 kV. With red LED display and acoustic alert Type: Weidmüller VPU III SO LD A Order no. 1351700000 or equivalent