KSPMH M20 BSC
Similar to illustration

KSPMH M20 BSC

KSPMH (Klippon blanking plug, type MH), Blanking plug, straight, M 20, 16 mm, Brass

Produkt ID 1477750000
Download datablad Engineering Support Product Downloads
Tilbehør 1 Anvendte produkter 8
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Certificate numbers cable gland General information Classifications Approvals

General ordering data

Version
KSPMH (Klippon blanking plug, type MH), Blanking plug, straight, M 20, 16 mm, Brass  
Order No.
1477750000  
Type
KSPMH M20 BSC  
GTIN (EAN)
4050118285451  
Qty.
20  Styk

Dimensions and weights

Height
21,5  mm
Height (inches)
0,846  inch
Length
21  mm
Length (inches)
0,827  inch
Diameter
20  mm
Wall thickness, min.
0,5  mm
Wall thickness, max.
15  mm
Net weight
57,1  g

Temperatures

Operating temperature
-60 °C...200 °C  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
6c  
REACH SVHC
Lead 7439-92-1  
SCIP
8dcc5b23-3a47-4c75-bd2c-bcb18becee86  

Certificate numbers cable gland

Approval conditions
ATEX  
IECEX  
Certificate no. cable gland (ATEX)
SIRA 09ATEX1320X or CML 19ATEX1089X  
Certificate no. cable gland (IECEx)
IECEx SIR 09.0131X or IECEx CML 19.0022X  
Identification
Ex d IIC Gb  
Ex e IIC Gb  
Ex tb lllC Db  

General information

Diameter of sealing ring
20  mm
External thread
M 20  
Halogen
halogen-free  
Impact resistance
7 J ATEX version  
Length of thread
16  mm
Material
Brass  
Note: protection class
• All metric sealing plugs have a thread pitch of 1.5 mm. • In Ex nR applications, the KSPMH must be fitted with a further seal. • To obtain the specified IP rating, the through hole must comply with the regulations of EN 50262 Table 1 and it should be possible to secure the sealing plug in a suitable manner. • Operating instructions are enclosed with each sealing plug; these must be read prior to installation. The sealing plugs must be installed according to the specifications in the operating instructions. • On installation of the KSPMH, the minimum number of engaged thread turns in line with the standard EN/IEC 60079-1, Section 5.3, must be observed. • With NEC / CEC applications, it must be ensured that the inner thread of the connection device into which the sealing plugs are screwed reveals at least 8 fully engaged thread turns. • If KSPMH sealing plugs are inserted into non-metallic Ex e connection devices, they must be connected to the system's earth circuit.  
O-Ring
Silicone  
O.D.
25,5  mm
Operating temperature range, max.
200  °C
Operating temperature range, min.
-60  °C
Protection class (UL)
Type 4X  
Protection degree
IP66  
IP68 (100 m / 168 h)  
Silicone
Yes  
Standards
EN 60079-31  
EN 60079-0  
EN 60079-1  
EN 60079-7  
Tightening torque
5  Nm
Water depth
100 m  

Classifications

ETIM 6.0
EC000451  
ETIM 7.0
EC000451  
ETIM 8.0
EC000451  
ETIM 9.0
EC000451  
ETIM 10.0
EC000451  
ECLASS 9.0
27-14-44-25  
ECLASS 9.1
27-14-44-35  
ECLASS 10.0
27-14-44-25  
ECLASS 11.0
27-14-44-25  
ECLASS 12.0
27-14-08-05  
ECLASS 13.0
27-14-08-05  
ECLASS 14.0
27-14-08-05  
ECLASS 15.0
27-14-08-05  

Approvals

ROHS
Conform