LM 5.00/09/135 3.5SN OR BX
Product image
LM 5.00/09/135 3.5SN OR BX
Product image
LM 5.00/09/135 3.5SN OR BX
Dimensional drawing
LM 5.00/09/135 3.5SN OR BX
Graph
Derating curve valid for 5.00 & 5.08 pitch

LM 5.00/09/135 3.5SN OR BX

Printed circuit board terminals, 5.00 mm, Number of poles: 9, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.5 mm², Box

Tuotteen tunnus 1845440000
Lataa tietosivu Tekninen tuki Tuotelataukset
Lisävarusteet 3 Samankaltaiset tuotteet 11
Approvals General ordering data Dimensions and weights Environmental Product Compliance Karakteristiska systemvärden Material data Провода, подходящие для подключения Dane znamionowe wg IEC 额定数据符合 CSA 标准 Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Omologazioni
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/33feeb02-46e9-4a14-9d79-8ec5ee409fe3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
인증 번호(cURus)
E60693 

General ordering data

Versione
Printed circuit board terminals, 5.00 mm, Number of poles: 9, 135°, Solder pin length (l): 3.5 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 2.5 mm², Box 
N. d’ordine
1845440000 
Tipo
LM 5.00/09/135 3.5SN OR BX 
GTIN (EAN)
4032248359264 
CPZ
50 items
Product data
IEC: 630 V / 17.5 A / 0.2 - 2.5 mm²
UL: 300 V / 15 A / AWG 24 - AWG 14 
Packaging
Box 

Dimensions and weights

Profondità
13,9 mm
깊이 (인치)
0,547 inch
Posizione verticale
19 mm
Height (inches)
0,748 inch
Height of lowest version
15,5 mm
Larghezza
45 mm
Width (inches)
1,772 inch
Peso netto
12,08 g

Environmental Product Compliance

Stato conformità RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Karakteristiska systemvärden

Famiglia prodotti
OMNIMATE Signal - series LM 
Tecnica di collegamento cavi
Clamping yoke connection 
Montaggio su circuito stampato
THT solder connection 
Direzione d'uscita del conduttore
135° 
Passo in mm (P)
5 mm
Passo in pollici (P)
0,197 "
Numero di poli
9 
핀 시리즈 수량
1 
assemblabile da parte del cliente
Yes 
Number of rows
1 
Numero massimo di poli ordinabili per fila
24 
Lunghezza spina a saldare (l)
3,5 mm
Dimensioni del codolo a saldare
0.95 x 0.8 mm 
Diametro foro di equipaggiamento (D)
1,3 mm
솔더 구멍 직경 공차(D)
+ 0,1 mm 
폴당 용접 핀 수
1 
스크류드라이버 블레이드
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,5 Nm
Clamping screw
M 2.5 
Stripping length
6 mm
L1 in mm
40 mm
L1 in inches
1,575 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
1.20 mΩ 
Insulation resistance
≥ 108 Ω 

Material data

절연재
Wemid (PA) 
컬러 코드
orange 
カラーチャート（類似）
RAL 2000 
절연재 그룹
I 
Comparative Tracking Index (CTI)
≥ 600 
절연 저항
≥ 108 Ω 
UL 94 가연성 등급
V-0 
Materiale dei contatti
Cu-alloy 
접점 표면
tinned 
코팅
1-3 μm Ni 
4-6 μm SN 
납땜 유형
matt 
용접 결선의 레이어 구조
1...3 µm Ni / 4...6 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Провода, подходящие для подключения

Campo di sezioni, min.
0,2 mm²
Campo di sezioni, max.
2,5 mm²
Sezione di collegamento cavo AWG, min.
AWG 24 
Sezione di collegamento cavo AWG, max.
AWG 14 
rigido, min. H05(07) V-U
0,2 mm²
rigido, max. H05(07) V-U
2,5 mm²
연선, 최소 H05(07) V-K
0,2 mm²
연선, 최대 H05(07) V-K
2,5 mm²
con terminale AEH con collare DIN 46 228/4, min.
0,25 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최대
1,5 mm²
와이어 엔드 페룰 포함, DIN 46228 pt 1, 최소
0,25 mm²
con terminale a norma DIN 46 228/1, max.
1,5 mm²
EN 60999 a x b 규격, ø
2.4 mm x 1.5 mm; 1.9mm 
클램프형 도체
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409500000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409700000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,25 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      9025740000
    • Stripping length:
      • nominal:
        5 mm
    • Recommended wire-end ferrule:
      9018910000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,34 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      9025750000
참조 텍스트
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Dane znamionowe wg IEC

przetestowane zgodnie z normą
IEC 60664-1 
IEC 61984 
정격 전류, 극 수(Tu=20°C)
17,5 A
정격 전류, 최대 극 수(Tu=20°C)
16 A
定格電流、最小極数 （Tu=40°C）
17,5 A
정격 전류, 최대 극 수(Tu=40°C)
14,2 A
서지 전압 클래스 정격 전압 / 오염 등급 II/2
630 V
서지 전압 클래스 정격 전압 / 오염 등급 III/2
320 V
서지 전압 클래스 정격 전압 / 오염 등급 III/3
250 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
4 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/2
4 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/3
4 kV
단시간 내전류 저항
3 x 1s with 120 A 

额定数据符合 CSA 标准

Istituto (CSA)
CSA 
Tanúsítvány száma (CSA)
200039-1815154 
Tensione nominale (Gruppo B / CSA)
300 V
Tensione nominale (Gruppo D / CSA)
300 V
Corrente nominale (Gruppo B / CSA)
18 A
Névleges áram (D felhasználási csoport / CSA)
10 A
Sezione di collegamento cavo AWG, min.
AWG 24 
Sezione di collegamento cavo AWG, max.
AWG 14 
Riferimento ai valori di omologazione
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Istituto (cURus)
CURUS 
Tanúsítvány száma (cURus)
E60693 
Tensione nominale (Gruppo B / UL 1059)
300 V
정격 전압(사용 그룹 D / UL 1059)
300 V
Corrente nominale (Gruppo B / UL 1059)
15 A
정격 전류(사용 그룹 D / UL 1059)
10 A
와이어 단면적, AWG, 최소
AWG 24 
Sezione di collegamento cavo AWG, max.
AWG 14 
Riferimento ai valori di omologazione
Specifications are maximum values, details - see approval certificate. 

Packing

Imballaggio
Box 
Lunghezza VPE
153 mm
Larghezza VPE
95 mm
Altezza VPE
84 mm

Type tests

Test: Durabilità delle siglature
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    mark of origin, type identification, pitch, type of material, approval marking UL, approval marking CSA, durability
  • Evaluation:
    available
Test: Sezione bloccabile
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.2 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.2 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed
Test per danni ai conduttori e allentamento accidentale degli stessi
  • Standard:
    DIN EN 60999-1 section 9.4 / 12.00
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed
Test di estrazione
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Requirement:
    ≥40 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K1.5
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed

Important note

Conformità IPC
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Note
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01