DRIKITP 24VAC 1CO LD
Product image
Similar to illustration
DRIKITP 24VAC 1CO LD
Wiring diagram
DRIKITP 24VAC 1CO LD
Graph
DC load limit curve
Resistive load
DRIKITP 24VAC 1CO LD
Graph
Electrical service life
DRIKITP 24VAC 1CO LD
Graph
AC operational voltage range
DRIKITP 24VAC 1CO LD
Dimensional drawing
Relay in combination with base
DRIKITP 24VAC 1CO LD
Miscellaneous
Type codes

DRIKITP 24VAC 1CO LD

D-SERIES DRI, Relaiskoppler, Anzahl Kontakte: 1, Wechsler AgSnO, Nennsteuerspannung: 24 V AC, Dauerstrom: 10 A, PUSH IN, Prüftaste vorhanden: Nein

Tuotteen tunnus 2576260000
Avaa konfiguraattorissa
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 9 Yksittäiset osat 3 Samankaltaiset tuotteet 8
Osvědčení Allgemeine Bestelldaten Rozměry a hmotnosti Temperaturen Environmental Product Compliance Control side Terhelés oldal Általános adatok Szigetelések koordinálása Further details of approvals / standards Anschlussdaten Besorolások

Osvědčení

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Uppfyllelse 

Allgemeine Bestelldaten

Version
D-SERIES DRI, Relaiskoppler, Anzahl Kontakte: 1, Wechsler AgSnO, Nennsteuerspannung: 24 V AC, Dauerstrom: 10 A, PUSH IN, Prüftaste vorhanden: Nein 
Order No.
2576260000 
Type
DRIKITP 24VAC 1CO LD 
GTIN (EAN)
4050118586022 
Qty.
10 items

Rozměry a hmotnosti

Depth
63 mm
Tiefe (inch)
2,48 inch
Height
102,1 mm
Magasság (coll)
4,02 inch
Width
15,9 mm
Width (inches)
0,626 inch
Net weight
55,314 g

Temperaturen

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
Нет SVHC выше 0,1 wt% 

Control side

Rated control voltage
24 V AC 
Rated current AC
50 mA 
Power rating
1.2 VA 
Coil resistance
240 Ω ± 10 % 
Status indicator
red LED 

Terhelés oldal

Rated switching voltage
250 V AC 
Continuous current
10 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
2500 VA 
DC switching capacity (resistive), max.
240 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
1 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

Általános adatok

Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Pusher
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0

Szigetelések koordinálása

Rated voltage
300 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
5 kVeff / 1min 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
5 kV (1.2/50 µs) 
Impulse withstand voltage at neighbouring contacts
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E312083 

Anschlussdaten

Wire connection method
PUSH IN 
Stripping length, rated connection
10 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,14 mm²
Clamping range, max.
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Wire cross-section, solid, min.
0,14 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire connection cross section, finely stranded, min.
0,14 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,14 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0.4 x 2.5 mm 

Besorolások

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01