Özellikler
| Order No. | 7760054245 |
| Type | EPAK-VMR-1PH-300-230V |
| GTIN (EAN) | 6944169733772 |
| Qty. | 1 adet |
| Depth | 89 mm |
| Depth (inches) | 3,504 inch |
| Height | 100 mm |
| Height (inches) | 3,937 inch |
| Width | 17,5 mm |
| Width (inches) | 0,689 inch |
| Length | 100 mm |
| Length (inches) | 3,937 inch |
| Net weight | 80 g |
| Storage temperature | -40 °C...85 °C |
| Operating temperature | -20 °C...60 °C |
| Humidity at operating temperature | 0...95 % (no condensation) |
| SIL in compliance with IEC 61508 | None |
| RoHS Compliance Status | Compliant |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 6a722fc5-2d22-41b4-9544-5b95e45a4b77 |
| Input frequency | 40…60 Hz |
| Input resistance, voltage | 1 MΩ±5% |
| Input signal |
DC
AC (sine) |
| Input voltage |
U1: 30…300 VAC/DC
U2: 6…60 VAC/DC |
| Number of outputs | 1 |
| Alarm function |
Surge voltage
Undervoltage Alarm range: 10%…100% ∗IN Hysteresis: 5%*UN (fixed) Alarm delay: 0…10 s |
| Max. switching voltage, AC | 250 V |
| Max. switching voltage, DC | 30 V |
| Number of digital outputs | 1 |
| Rated switching current | 3 A |
| Type | Relay, 1 CO contact |
| Accuracy |
Setting tolerance: 5% of UN
Transmission tolerance: 5% of UN |
| Configuration | DIP switch and potentiometer |
| Galvanic isolation | between input ⁄ output ⁄ supply ⁄ relay |
| Nominal power consumption | 1,5 VA |
| Operating altitude | ≤ 2000 m |
| Power consumption |
<60 mA @24 VDC
<9 mA @230 VAC |
| Protection degree | IP20 |
| Repeat accuracy | 2 % *Urated voltage |
| Step response time | ≤ 200 ms (10…90%) |
| Temperature coefficient |
≤ 250 ppm/K of final value
± 250 ppm/K 350 ppm/K |
| Voltage supply | 85...264 VAC |
| EMC standards |
IEC 61000-6-2
IEC 61000-6-4 EN 61326 |
| Galvanic isolation | between input ⁄ output ⁄ supply ⁄ relay |
| Impulse withstand voltage | 4 kV (1.2/50 µs) |
| Insulation voltage | 2.2 kVAC, 1 min, 50 Hz |
| Pollution severity | 2 |
| Rated voltage | 300 V ACrms |
| Surge voltage category | III |
| Type of connection | Screw connection |
| Tightening torque, min. | 0,4 Nm |
| Tightening torque, max. | 0,6 Nm |
| Clamping range, rated connection | 2 mm² |
| Clamping range, min. | 0,5 mm² |
| Clamping range, max. | 2 mm² |
| Wire connection cross section AWG, min. | AWG 30 |
| Wire connection cross section AWG, max. | AWG 14 |
| Approval/Certificate/Document of Conformity | [Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_35551) |
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_72212) |
| CADENAS eCATALOG | [CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=7760054245) |
| User Documentation | [Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_37896) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC002654 |
| ETIM 7.0 | EC002654 |
| ETIM 8.0 | EC002654 |
| ETIM 9.0 | EC002654 |
| ETIM 10.0 | EC002654 |
| ECLASS 9.0 | 27-21-01-22 |
| ECLASS 9.1 | 27-21-01-22 |
| ECLASS 10.0 | 27-21-01-22 |
| ECLASS 11.0 | 27-21-01-22 |
| ECLASS 12.0 | 27-21-01-22 |
| ECLASS 13.0 | 27-21-01-22 |
| ECLASS 14.0 | 27-21-01-22 |
| ECLASS 15.0 | 27-21-01-22 |
| Approvals |  |
| ROHS | Conform |
Aksesuarlar
-
Ürün No.:1720620000Ambalaj birimi:320 adet
Dekafix, Terminal marker, 5 x 7.5 mm, Pitch in mm (P): 7.50 Weidmueller, white
MarkersTerminal markersMultiCardDekafixDEK 5/7.5Blank