ACT20X-2HAI-2SAO-S

Ex supply isolator for standard DC current signals, 2-channel, HART transparent
2-channel supply isolator in 22.5 mm width with external power supply,
for transmitting and isolating 4...20 mA standard signals from Ex Zones 0,1,2 to the safe
zones. This component has active and passive inputs. External sensors can be supplied with
> 15 VDC. The 4...20 mA output circuit can be operated either passively or actively.
Status and error messages are available via a relay contact (NO).

The component can be configured using standard FDT/DTM software.

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 119.2/ 22.5/ 113.6
Screw connection/ Nominal cross-section 2.5 mm²
Protection degree: IP 20  

Input                          2 x 4...20 mA 
                                      > 15 V DC sensor supply                                     
Output 
  active                                                         2 x 4...20 mA
  passive 2 x 4...20 mA current loop max. 26 V DC
Load                             < 600 Ohm
Accuracy                   < 0,1 % v.E
Temperature coefficient   < 0,01% v.E./°C (Tu) 
Alarm output relay 1 NO contact 
                                      250 V AC / 30 V DC @ 2A safe zone
                                      32 V AC @ 0.5 A/ 32 VDC @ 1 A Zone 2
Auxiliary power                                     19...31.2 V DC
Power loss approx. 3 W
Ambient
temperature range -20 °C...+60 °C

Secure isolation                   EN 61010, 3-way isolation up to 2.6 kV AC/DC of all circuits against each other
Working voltage                     300 V AC/DC at overvoltage category II and pollution degree 2
Approvals cULus, ATEX IECEX, FM

ATEX marking II 3 G ExnA nC IIC T4
ATEX characteristic data U₀ = 28 V DC
                                       I₀  = 93 mA DC
                                       P₀ = 650 mW

^_Type                                                              ACT20X-2HAI-2SAO-S