DRMKIT 220VDC 2CO LD

D-SERIES DRM, Relay module, Number of contacts: 2, CO contact AgNi flash gold-plated, Rated control voltage: 220 V DC, Continuous current: 10 A, Screw connection, Test button available: No

Item No. 1542370000

General ordering data

Version
Order No.
Type
GTIN (EAN)
Qty.

Dimensions and weights

Depth
Depth (inches)
Height
Height (inches)
Width
Width (inches)
Net weight

Temperatures

Storage temperature
Operating temperature

Environmental Product Compliance

RoHS Compliance Status
RoHS Exemption (if applicable/known)
REACH SVHC
SCIP

Control side

Rated control voltage
Rated current DC
Power rating
Coil resistance
Status indicator
Protective circuit

Load side

Rated switching voltage
Continuous current
Max. switching frequency at rated load
Max. switching voltage, AC
Min. switching power
Inrush current
AC switching capacity (resistive), max.
DC switching capacity (resistive), max.
Switch-on delay
Switch-off delay
Contact type
Mechanical service life

General data

Rail
Test button available
Mechanical switch position indicator
Colour
UL94 flammability rating component

Insulation coordination

Rated voltage
Pollution severity
Surge voltage category
Insulating material group
Clearance and creepage distances for control side - load side
Dielectric strength for control side - load side
Dielectric strength of neighbouring contacts
Dielectric strength of open contact
Impulse withstand voltage
Protection degree

Further details of approvals / standards

Certificate no. (cURus) relay
Certificate no. (cURus) base

Connection data

Wire connection method
Stripping length, rated connection
Tightening torque, min.
Tightening torque, max.
Clamping range, min.
Clamping range, max.
Wire cross-section, solid, min.
Wire cross-section, solid, max.
Wire connection cross section, finely stranded, min.
Wire connection cross section, finely stranded, max.
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
Wire connection cross section, finely stranded, two clampable wires, min.
Wire cross-section, finely stranded, two clampable wires, max.
Blade size

Classifications

ETIM 6.0
ETIM 7.0
ETIM 8.0
ETIM 9.0
ETIM 10.0
ECLASS 9.0
ECLASS 9.1
ECLASS 10.0
ECLASS 11.0
ECLASS 12.0
ECLASS 13.0
ECLASS 14.0
ECLASS 15.0

Approvals

Approvals
ROHS