LM2NZF 5.08/34/135 3.5SN OR BX
Product image
Similar to illustration
LM2NZF 5.08/34/135 3.5SN OR BX
Dimensional drawing
LM2NZF 5.08/34/135 3.5SN OR BX
Graph

LM2NZF 5.08/34/135 3.5SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 34, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box

Produkt ID 1782540000
Download datablad Produktdownloads Engineering-support
Anvendte produkter 19
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Printed circuit board terminals, 5.08 mm, Number of poles: 34, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box 
Order No.
1782540000 
Type
LM2NZF 5.08/34/135 3.5SN OR BX 
GTIN (EAN)
4032248177660 
VPE
10 Styk
Product data
IEC: 630 V / 15 A / 0.2 - 2.5 mm²
UL: 300 V / 10 A / AWG 24 - AWG 14 
Packaging
Box 

Dimensions and weights

Depth
24,05 mm
Глубина (дюймов)
0,947 inch
Height
29,1 mm
Height (inches)
1,146 inch
Height of lowest version
25,6 mm
Width
87,06 mm
Width (inches)
3,428 inch
Net weight
49 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LMZF 
Wire connection method
Tension-clamp connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
135° 
Pitch in mm (P)
5,08 mm
Pitch in inches (P)
0,2 "
Number of poles
34 
liczba rzędów z biegunami
2 
Fitted by customer
No 
Number of rows
2 
Solder pin length (l)
3,5 mm
Solder pin dimensions
0.7 x 1.0 mm 
Solder eyelet hole diameter (D)
1,3 mm
Tolérance du diamètre du trou d'implantation (D)
+ 0,1 mm 
Anzahl Lötstifte pro Pol
1 
Schraubendreherklinge
0.6 x 3.5 
Screwdriver blade standard
DIN 5264-A 
Stripping length
7,5 mm
L1 in mm
81,28 mm
L1 in inches
3,2 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
2.10 mΩ 

Material data

Isolierstoff
PA 
Farbe
orange 
Colour chart (similar)
RAL 2000 
Isolierstoffgruppe
I 
Komparativní index sledování (CTI)
≥ 600 
UL 94 가연성 등급
V-0 
Contact material
Cu-alloy 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Clamping range, min.
0,13 mm²
Clamping range, max.
2,5 mm²
Leiteranschlussquerschnitt AWG, min.
AWG 24 
Wire connection cross section AWG, max.
AWG 14 
Pevné, min. H05(07) V-U
0,2 mm²
eindrähtig, max. H05(07) V-U
2,5 mm²
Pružné, min. H05(07) V-K
0,2 mm²
Pružné, max. H05(07) V-K
1,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,25 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
1,5 mm²
mit Aderendhülse nach DIN 46 228/1, min.
0,25 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
1,5 mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.4 mm x 1.5 mm 
Conductor embornable
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0372700000
Hinweistext
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Bemessungsstrom, min. Polzahl (Tu=20°C)
15 A
Bemessungsstrom, max. Polzahl (Tu=20°C)
12 A
Rated current, min. number of poles (Tu=40°C)
13 A
Jmenovitý proud, max. počet pólů (Tu=40 °C)
10 A
Jmenovité napětí pro třídu přepětí / stupeň znečištění II/2
630 V
Jmenovité napětí pro třídu přepětí / stupeň znečištění III/2
320 V
Bemessungsspannung bei Überspannungsk./Verschmutzungsgrad III/3
250 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4 kV
Bemessungsstoßspannung bei Überspannungsk./Verschmutzungsgrad III/2
4 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4 kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
10 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 14 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Névleges feszültség (D felhasználási csoport / UL 1059)
300 V
Rated current (Use group B / UL 1059)
10 A
Névleges áram (D felhasználási csoport/ UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 14 

Packing

Packaging
Box 
VPE length
179 mm
VPE width
110 mm
VPE height
48 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01