LMFS 5.08/07/180 3.5SN OR BX
Product image
LMFS 5.08/07/180 3.5SN OR BX
Product image
LMFS 5.08/07/180 3.5SN OR BX
Dimensional drawing
LMFS 5.08/07/180 3.5SN OR BX
Graph
LMFS 5.08/07/180 3.5SN OR BX
Graph
LMFS 5.08/07/180 3.5SN OR BX
Product benefits
Optional conductor outlet direction
Stable mechanical design
LMFS 5.08/07/180 3.5SN OR BX
Product benefits
High reliability of the current capacity
LMFS 5.08/07/180 3.5SN OR BX
Product benefits
Direct conductor entry
Cross section up to 2.5 mm²
LMFS 5.08/07/180 3.5SN OR BX
Product benefits
Maintenance through test point

LMFS 5.08/07/180 3.5SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 7, 180°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN, Clamping range, max. : 2.5 mm², Box

Tuotteen tunnus 1331490000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 1 Samankaltaiset tuotteet 17
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

인증
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319230/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (cURus)
E60693 

General ordering data

버전
Printed circuit board terminals, 5.08 mm, Number of poles: 7, 180°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN, Clamping range, max. : 2.5 mm², Box 
주문 번호
1331490000 
유형
LMFS 5.08/07/180 3.5SN OR BX 
GTIN(EAN)
4050118135282 
Qty.
40 items
Product data
IEC: 400 V / 24 A / 0.2 - 2.5 mm²
UL: 300 V / 20 A / AWG 24 - AWG 12 
Packaging
Box 

Dimensions and weights

깊이
14,8 mm
Depth (inches)
0,583 inch
높이
18,7 mm
Height (inches)
0,736 inch
Height of lowest version
15,2 mm
너비
38,18 mm
Width (inches)
1,503 inch
Net weight
10,21 g

Environmental Product Compliance

RoHS 준수 상태
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LMF 
Wire connection method
PUSH IN 
Mounting onto the PCB
THT solder connection 
Směr výstupu vodiče
180° 
Pitch in mm (P)
5,08 mm
Pitch in inches (P)
0,2 "
Number of poles
7 
Pin series quantity
1 
Fitted by customer
No 
Number of rows
1 
Max. adjacent poles per row
24 
Solder pin length (l)
3,5 mm
Dimensiones del pin de soldadura
d = 0.8 mm 
0.6 x 0.8 mm 
Solder eyelet hole diameter (D)
1,1 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Number of solder pins per pole
2 
Screwdriver blade
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Stripping length
10 mm
L1 in mm
30,48 mm
L1 in inches
1,2 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 

Material data

절연재
Wemid (PA) 
컬러 코드
orange 
컬러 차트(유사)
RAL 2000 
CTI(Comparative Tracking Index, 비교 추적 지수)
≥ 600 
UL 94 flammability rating
V-0 
접점 재질
Cu-alloy 
접점 표면
tinned 
Coating
4-6 μm SN 
Typ cynowania
matt 
용접 결선의 레이어 구조
4...8 µm Sn matt 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
−50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
−25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

클램프 범위, 최소
0,12 mm²
2,5 mm²
결선 단면규격 AWG, 최소
AWG 24 
결선 단면규격 AWG, 최대
AWG 12 
단선, 최소 H05(07) V-U
0,2 mm²
Solid, max. H05(07) V-U
2,5 mm²
연선, 최소 H05(07) V-K
0,2 mm²
연선, 최대 H05(07) V-K
2,5 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최소
0,25 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최대
2,5 mm²
med ändhylsa, DIN 46228 pt 1, min.
0,25 mm²
페럴 포함, DIN 46228 pt 1, 최대
2,5 mm²
EN 60999 a x b 규격, ø
2.4 mm x 1.5 mm 
클램프형 도체
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025870000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004050000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025860000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0542500000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9019100000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0282800000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0186500000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0635100000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004080000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 60947-7-4 
정격 전류, 극 수(Tu=20°C)
24 A
정격 전류, 최대 극 수(Tu=20°C)
24 A
정격 전류, 극 수(Tu=40°C)
24 A
Rated current, max. number of poles (Tu=40°C)
24 A
서지 전압 클래스 정격 전압 / 오염 등급 II/2
400 V
서지 전압 클래스 정격 전압 / 오염 등급 III/2
320 V
서지 전압 클래스 정격 전압 / 오염 등급 III/3
250 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
4 kV
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения III/2
4 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/3
4 kV
단시간 내전류 저항
3 x 1s with 120 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
20 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 12 

Rated data acc. to UL 1059

Institute (cURus)
CURUS 
Certificate No. (cURus)
E60693 
Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Courant nominal (groupe d'utilisation B / UL 1059)
20 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 12 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

Packaging
Box 
VPE length
352 mm
VPE width
140 mm
VPE height
31 mm

Type tests

Test: Durability of markings
  • Standard:
    IEC 61984 section 6.2 and 7.3.2 / 10.11
  • Test:
    mark of origin, type identification, type of material, approval marking UL, approval marking CSA, durability, pitch, date clock
  • Evaluation:
    available
Test: Clampable cross section
  • Standard:
    IEC 60999-1 section 7 and 9.1 / 11.99, IEC 60947-1 section 8.2.4.5.1 / 03.11
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.14 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.14 mm²
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 2.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG26/19
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed
Test poškození a náhodného uvolnění vodičů
  • Standard:
    IEC 60999-1 section 9.4 / 11.99
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
  • Evaluation:
    passed
Pull-out test
  • Standard:
    IEC 60999-1 section 9.5 / 11.99
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
  • Evaluation:
    passed

Important note

IPC 준수
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
참고 사항
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01