PV 210S5F3CXXV1O0TA1PA10PWW
PV 210S5F3CXXV1O0TA1PA10PWW
PV 210S5F3CXXV1O0TA1PA10PWW
PV 210S5F3CXXV1O0TA1PA10PWW
PV 210S5F3CXXV1O0TA1PA10PWW

PV 210S5F3CXXV1O0TA1PA10PWW

Fotovoltaico, Quadro di stringa, 1000 V, 2 MPP, 10 ingressi / 1 uscita per MPP, Con portafusibile, Protezione contro le sovratensioni, Interruttore sezionatore, Controllo della corrente, Pressacavo, Progettato per inverter Fronius Tauro Eco

Ürün No. 8000111138
Veri sayfasını indir Download dei prodotti
İlgili ürünler 22
승인 Dati generali per l’ordinazione Dimensioni e pesi 온도 Conformità ambientale del prodotto Included in delivery Electrical characteristics Enclosure General data Inputs Outputs Surge protection DC side DC load break switch Nota importante 분류 입찰 사양 시트

승인

ROHS
준수 

Dati generali per l’ordinazione

Version
Fotovoltaico, Quadro di stringa, 1000 V, 2 MPP, 10 ingressi / 1 uscita per MPP, Con portafusibile, Protezione contro le sovratensioni, Interruttore sezionatore, Controllo della corrente, Pressacavo, Progettato per inverter Fronius Tauro Eco 
Order No.
8000111138 
Type
PV 210S5F3CXXV1O0TA1PA10PWW 
GTIN (EAN)
4099986933637 
Qty.
1 items

Dimensioni e pesi

Depth
350 mm
Depth (inches)
13,78 inch
부가 콤포넌트 포함 깊이
350 mm
Height
1.065 mm
높이 (인치)
41,929 inch
Width
852 mm
폭 (인치)
33,543 inch
Net weight
45.000 g

온도

Ambient temperature
-20 °C…45 °C 

Conformità ambientale del prodotto

RoHS Compliance Status
Conforme con esenzione 
RoHS Exemption (if applicable/known)
6c, 7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
1d28ada4-1634-4382-8635-45f6353a6574 

Included in delivery

Included accessories
  • Article:
    Mounting foot
  • Quantity:
    4

Electrical characteristics

Current per Maximum Power Point, max.
135 A
Rated DC voltage
1.000 V

Enclosure

Connection type string
Internal terminal (with cable gland feed-through) 
Enclosure attachment
Fixing lugs 
Impact resistance
IK10 in accordance with IEC 62262 
Insulating material
Polyester glass-fibre reinforced, Polycarbonate 
Protection class
II 
Type of mounting
Rögzítőfülek 

General data

Installation location
Protected outdoor area (>1 km from sea) 
Protection degree
IP65 
Standards
EN 61643-31 

Inputs

Amount of maximum power points (MPP)
2 
Cartridge fuse
10 x 38 mm 
Fuse type
Empty fuse holder 
Fuse-link standard
gPV (EN 60269-6) 
Fused poles of string
+/- 
Fuses
Yes 
Max. number of DC inputs
per Maximum Power Point 10 inputs connected in parallel 
Number of conduit inlets
10 
Number of string inputs per MPP
≥ 7…≤ 10 
Surge protection auxiliary contact
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      2,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      2,5 mm²
Liczba wejść
10 

Outputs

Max. number of DC outputs
per Maximum Power Point 1 output 

Surge protection DC side

Discharge current In (8/20 µs)
20 kA 
Discharge current, max. (8/20 µs)
40 kA
Lightning test current Iimp (10/350 µs)
6.25 kA 
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE
1.000 V
PV system voltage, max. Ucpv
1.000 V
Requirements class
Type I/II 
Short-circuit curent ISCPV
162,5 A
Standards
EN 61643-31 
Surge protection DC side
1000 V type I + II 
Total discharge current Itotal ( 8/20µs)
50 kA
Total discharge current Itotal (10/350µs)
12,5 kA

DC load break switch

Motor drive available
No 
Number of breaking operation cycles at rated current
200 
Number of operating cycles
10000 
Rated impulse withstand voltage
12 kV 
Switch disconnector execution
interruptor en el interior de la caja 
Voltage type
DC 

Nota importante

Product information
Il numero SCIP è stato assegnato a causa di un contenuto di piombo superiore allo 0,1 % del peso netto.

Istruzioni per l'uso sicuro secondo l'ECHA:
l'identificazione della sostanza pericolosa è sufficiente per consentire l'uso sicuro dell'articolo durante tutto il suo ciclo di vita, compresa la fase di durata, smontaggio e smaltimento/riciclaggio Fuses are not included 

분류

ETIM 8.0
EC003857 
ETIM 9.0
EC003857 
ETIM 10.0
EC003857 
ECLASS 14.0
22-57-02-92 
ECLASS 15.0
22-57-02-92 

입찰 사양 시트

긴 사양

Combiner box for inverters with 2 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to DIN CLC/TS 51643-32.

MPP1:
10 inputs, connection via M16 cable gland. Screw connection / single-wire, multi-wire, with/without ferrule.
1 output, connection via M25 cable gland. Screw connection / single-wire, multi-wire, with/without ferrule.

MPP2:
identical to MPP1

Max. string voltage Uoc: 1000 VDC
1 class/type I + II combined arrester with signal contact
Fuse holders for inputs and outputs (fuses 10x38 to be ordered separately)
With current Monitoring
With lockable DC load break switch for safe separation of the string lines according to DIN EN IEC 60947-3
Connection of the signal contact via M16 cable glands (Clamping range 5-10 mmØ) max. conductor cross-section: 1.5 mm²
Connection of the functional earth via M16 cable glands (Clamping range 5-10 mmØ) Conductor cross-section: ≥ 16 mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 1065x852x350 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1 and EN 61439-2