DRMKIT 24VDC 4CO LD
Product image
Similar to illustration
DRMKIT 24VDC 4CO LD
Wiring diagram
DRMKIT 24VDC 4CO LD
Graph
DC load limit curve
Resistive load
DRMKIT 24VDC 4CO LD
Graph
Electrical service life
DRMKIT 24VDC 4CO LD
Graph
Derating curve
DRMKIT 24VDC 4CO LD
Graph
DC operational voltage range
DRMKIT 24VDC 4CO LD
Dimensional drawing
DRMKIT 24VDC 4CO LD
Miscellaneous
Type codes

DRMKIT 24VDC 4CO LD

D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi flash gold-plated, Rated control voltage: 24 V DC, Continuous current: 5 A, Screw connection, Test button available: No

Ürün No. 1542410000
Konfigüratörde aç
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 15 Münferit parçalar 4 İlgili ürünler 8
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi flash gold-plated, Rated control voltage: 24 V DC, Continuous current: 5 A, Screw connection, Test button available: No 
Order No.
1542410000 
Type
DRMKIT 24VDC 4CO LD 
GTIN (EAN)
4050118347241 
Qty.
10 adet

Dimensions and weights

Depth
66,8 mm
Depth (inches)
2,63 inch
Height
79,9 mm
Height (inches)
3,146 inch
Width
27,2 mm
Width (inches)
1,071 inch
Net weight
93,35 g

Temperatures

Storage temperature
-40 °C...70 °C 
Ambient temperature
-40 °C…60 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a 
REACH SVHC
Lead 7439-92-1 
SCIP
611f3393-31e7-4ef5-8360-95619a629f27 

Control side

Rated control voltage
24 V DC 
Rated current DC
36.9 mA 
Power rating
0.9 W 
Coil resistance
630 Ω ± 10 % 
Status indicator
Green LED 
Protective circuit
Free-wheeling diode 

Load side

Rated switching voltage
250 V AC 
Continuous current
5 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Min. switching power
10 mA @ 12 V 
100 mA @ 5 V 
Inrush current
10 A / 50 ms 
AC switching capacity (resistive), max.
1250 VA 
DC switching capacity (resistive), max.
120 W @ 24 V 
Switch-on delay
<20 ms 
Switch-off delay
<20 ms 
Contact type
4 CO contact (AgNi flash gold-plated) 
Mechanical service life
20 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
Yes 
Colour
black 
UL94 flammability rating component
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    HB
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Housing
  • UL94 flammability rating:
    V-2

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
C 
Clearance and creepage distances for control side - load side
≥ 5.5 mm 
Dielectric strength for control side - load side
1,8 kVeff / 1 min 
Dielectric strength of neighbouring contacts
1 kVeff / 1 min 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E312083 

Connection data

Wire connection method
Screw connection 
Stripping length, rated connection
7 mm
Tightening torque, min.
0,5 Nm
Tightening torque, max.
0,7 Nm
Clamping range, min.
0,5 mm²
2,5 mm²
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Průřez připojení vodičů, jemně stáčené, max.
2,5 mm²
Section de raccordement du conducteur, souple avec embout DIN 46228/4, min.
0,5 mm²
Vezeték csatlakozási keresztmetszet, finomsodratú, érvéghüvelyekkel és műanyag gallérokkal DIN 46228/4, névleges csatlakozás, max.
2,5 mm²
컨덕터 단면, 연선, AEH(DIN 46228-1), 최소
0,5 mm²
Сечение подключаемого провода, многожильного, 46228 AEH (DIN 46228-1), макс.
2,5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0,5 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1 mm²
Blade size
size PH1 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01