SCS 24VDC P2SIL3ES
SCS 24VDC P2SIL3ES
Wiring diagram
SCS 24VDC P2SIL3ES
DC load limit curve
SCS 24VDC P2SIL3ES
Dimensioned drawing
SCS 24VDC P2SIL3ES
Miscellaneous
Type codes

SCS 24VDC P2SIL3ES

SAFESERIES, Safety relay,24 V DC ±15 %, 24 VDC +15% / -10% during auto-start, 35 mA, 5, SIL 3, DIN EN 61508, EN ISO 13849-1 (PLe)

Tuotteen tunnus 1319280000
Avaa konfiguraattorissa
Lataa tietosivu Tekninen tuki Ohjelmistotuki Tuotelataukset
Lisävarusteet 19 Samankaltaiset tuotteet 1
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input (power supply) Starting circuit Monitoring circuit Output (release circuit) Feedback output Safety-related basic specifications General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/c809b3ab-e765-499c-852e-d528779da9f7/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
SAFESERIES, Safety relay,24 V DC ±15 %, 24 VDC +15% / -10% during auto-start, 35 mA, 5, SIL 3, DIN EN 61508, EN ISO 13849-1 (PLe) 
Order No.
1319280000 
Type
SCS 24VDC P2SIL3ES 
GTIN (EAN)
4050118125078 
Qty.
1 items

Dimensions and weights

Depth
114,1 mm
Depth (inches)
4,492 inch
Height
119,6 mm
Height (inches)
4,709 inch
Width
22,5 mm
Width (inches)
0,886 inch
Net weight
292 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-25 °C…55 °C 
Humidity
40 °C / 93 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
6,6'-di-tert-butyl-2,2'-methylenedi-p-cresol 119-47-1 
SCIP
332bc555-bc84-431d-ba7a-563be05e80bd 

Input (power supply)

Connection designation
A1 
A2 
C1 
C2 
Rated control voltage
24 V DC ±15 % 
24 VDC +15% / -10% during auto-start 
Current consumption
55 mA (release circuit enabled) 
6 mA (release circuit not enabled) 
Guaranteed current consumption at 24 V DC -10%
35 mA
Inrush current
750 mA / 5 ms (for starting with S33/S34 (start circuit)) 
2 A / 20 ms (for starting with A1/A2 (autostart)) 
Response time
with bridge via C1/C2: typ. 50 ms 
without bridge via C1/C2: typ. 20 ms 
Status display
LED green: supply 
Yellow LED: signal 
Protective circuit
Reverse polarity protection 
Free-wheeling diode 
Short-circuit detection
Yes, max. 4 s up to disconnection (thermistor) 

Starting circuit

Anschlussbezeichnung
S33 
S34 
S35 
動作電圧
22 V DC, from internal power supply 
Funzione
falling edge (button via S33/S34) 
rising edge (permanent bridge via S33/S35) 

Monitoring circuit

Connection designation
S11 
S12 
S21 
S22 
Input
2, each externally bridgeable 
Tensión de servicio
22 V DC, from internal power supply 

Output (release circuit)

Connection designation
13 
14 
23 
24 
Contact design
2 NO positively-driven (EN 50205 type B) 
Contact base material
AgSnO 
Коммутируемое напряжение, перем. ток, макс.
250 V
Max. permissible switching current
5 A
Max. switching current, external fuse
5 A 
Max. switching capacity
1250 VA 
External back-up fuse
5 A time-lag 
Turn-on time
55 ms (C1/C2 bridged, switched via A1/A2) 
30 ms (opening/closing of monitoring circuit) 
Turn-off time
55 ms (C1/C2 bridged, switched via A1/A2) 
15 ms (opening/closing of monitoring circuit) 
Min. switching capacity
10 mA @ 12 V 

Feedback output

Označení připojení
31 
32 
Contact design
1 NC positively-driven (EN 50205 type B) 
Tension de commutation AC, max. (Sortie de retour)
250 V
Макс. коммутируемый ток
1 A 

Safety-related basic specifications

Device type
A 
Tproof
12 a
Hardware fault tolerance (HFT)
1 
Safety category
SIL 3 
Safety standard
DIN EN 61508 
EN ISO 13849-1 (PLe) 

General data

Operating altitude
≤ 2000 m 
above sea level 
Mounting rail
TS 35 
Colour
black 
yellow 

Insulation coordination

Rated voltage
300 V
Pollution severity
2 
Surge voltage category
III 
Clearance and creepage distances for control side - load side
≥ 5.5 mm 
Dielectric strength for control side - load side
4 kVeff / 1 min 
Dielectric strength to mounting rail
4 kVeff / 1 Min. 
Impulse withstand voltage
6 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Standards
EN 61000 
EN 61326-3-2 
EN ISO 13849-1 (PLe) 
Equipment for furnaces
EN 50156 

Connection data

Wire connection method
Screw connection 
Stripping length, rated connection
8 mm
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,13 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 12 
Wire cross-section, solid, min.
0,2 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,2 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,2 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,2 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5 mm²
Blade size
size PH0 

Classifications

ETIM 8.0
EC001449 
ETIM 9.0
EC001449 
ETIM 10.0
EC001449 
ECLASS 14.0
27-37-18-19 
ECLASS 15.0
27-37-18-19