S2L 3.50/40/180F 3.5SN OR BX
Product image
S2L 3.50/40/180F 3.5SN OR BX
Product image
S2L 3.50/40/180F 3.5SN OR BX
Dimensional drawing

S2L 3.50/40/180F 3.5SN OR BX

PCB 플러그인 커넥터, 수형 헤더, 플랜지, THT 용접 결선, 3.50 mm, 극 수: 40, 180°, 솔더 핀 길이(l): 3.5 mm, 주석 도금, 주황색, 박스

Ürün No. 2559330000
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 3 İlgili ürünler 42
Approvals 일반 주문 데이터 Dimensions et poids 환경 제품 규정 준수 시스템 사양 Données des matériaux Datos nominales conformes a IEC Rated data acc. to CSA Rated data acc. to UL 1059 Csomagolás Important note Classifications

Approvals

ROHS
Conform 

일반 주문 데이터

Version
PCB 플러그인 커넥터, 수형 헤더, 플랜지, THT 용접 결선, 3.50 mm, 극 수: 40, 180°, 솔더 핀 길이(l): 3.5 mm, 주석 도금, 주황색, 박스 
Order No.
2559330000 
Type
S2L 3.50/40/180F 3.5SN OR BX 
GTIN (EAN)
4050118894622 
VPE
24 adet
Product data
IEC: 250 V / 10 A
UL: 150 V / 10 A 
Packaging
Box 

Dimensions et poids

Depth
10,5 mm
Tiefe (inch)
0,413 inch
Height
17,7 mm
Height (inches)
0,697 inch
Height of lowest version
14,2 mm
Width
77 mm
Width (inches)
3,031 inch
Nettogewicht
10,54 g

환경 제품 규정 준수

RoHS Compliance Status
준수, 예외 미존재 
REACH SVHC
No SVHC above 0.1 wt% 

시스템 사양

Product family
OMNIMATE 시그널 - 시리즈 B2L/S2L 3.50 - 2층 
Type of connection
Board connection 
Mounting onto the PCB
THT solder connection 
Pitch in mm (P)
3,5 mm
Raster in Zoll (P)
0,138 "
Outgoing elbow
180° 
Number of poles
40 
Number of solder pins per pole
1 
Solder pin length (l)
3,5 mm
Solder pin dimensions
d = 1.0 mm 
Octagonal 
Solder eyelet hole diameter (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
L1 in mm
66,5 mm
L1 in inches
2,62 "
Pin series quantity
2 
Touch-safe protection acc. to DIN VDE 57 106
finger-safe unplugged/ back-of-hand-safe plugged 
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Can be coded
Yes 
Plugging force/pole, max.
5 N
Pulling force/pole, max.
4 N
Tightening torque
  • Torque type:
    Mounting screw, PCB
  • Usage information:
    • Tightening torque:
      • min.:
        0,1 Nm
      • max.:
        0,15 Nm
    • Recommended screw:
      • Part number:
        1610740000

Données des matériaux

Isolierstoff
PBT 
Farbe
orange 
Farbtabelle (ähnlich)
RAL 2000 
Isolierstoffgruppe
IIIa 
Kriechstromfestigkeit (CTI)
≥ 200 
UL 94 flammability rating
V-0 
Kontaktmaterial
Cu-alloy 
Kontaktoberfläche
tinned 
Layer structure of solder connection
2...3 µm Ni / 5...7 µm Sn glossy 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-30 °C
Temperature range, installation, max.
100 °C

Datos nominales conformes a IEC

testado según la norma
IEC 60664-1 
IEC 61984 
Bemessungsstrom, min. Polzahl (Tu=20°C)
10 A
Bemessungsstrom, max. Polzahl (Tu=20°C)
10 A
Bemessungsstrom, min. Polzahl (Tu=40°C)
9 A
Bemessungsstrom, max. Polzahl (Tu=40°C)
8,5 A
Bemessungsspannung bei Überspannungsk./Verschmutzungsgrad II/2
250 V
Bemessungsspannung bei Überspannungsk./Verschmutzungsgrad III/2
125 V
Bemessungsspannung bei Überspannungsk./Verschmutzungsgrad III/3
80 V
Bemessungsstoßspannung bei Überspannungsk./Verschmutzungsgrad II/2
2,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5 kV
Bemessungsstoßspannung bei Überspannungsk./Verschmutzungsgrad III/3
2,5 kV
Krátkodobý odpor proti zkratovému proudu
3 x 1s with 77 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
150 V
Rated current (Use group B / CSA)
5 A

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
150 V
Nennstrom (Use group B / UL 1059)
10 A

Csomagolás

Packaging
Box 
VPE length
338 mm
VPE width
130 mm
VPE height
27 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Spacing between rows: see hole layout
  • Rated current related to rated cross-section & min. No. of poles.
  • Diameter of solder eyelet D = 1.3+0.1 mm
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • For additional mechanical support for male connectors with screw flange (…F), we recommend an additional cable gland with fastening screws (sheet metal screw ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C – see Accessories). Cable gland only permitted before soldering.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01