VPU ZPA S I 3+1 300/12,5

Surge voltage arrester, Low voltage, Leakage-current-free, TN-C-S, TN-S, TT, IT with N

Ürün No. 2830900000

Özellikler

General ordering data

Version	Surge voltage arrester, Low voltage, Leakage-current-free, TN-C-S, TN-S, TT, IT with N
Order No.	2830900000
Type	VPU ZPA S I 3+1 300/12,5
GTIN (EAN)	4064675390084
Qty.	1 adet

Dimensions and weights

Depth	101,6 mm
Depth (inches)	4 inch
Height	230,6 mm
Height (inches)	9,079 inch
Width	36 mm
Width (inches)	1,417 inch
Net weight	633 g

Temperatures

Storage temperature	-40 °C...85 °C
Operating temperature	-40 °C...85 °C
Humidity	5...95 %, no condensation

Environmental Product Compliance

RoHS Compliance Status	Compliant without exemption
REACH SVHC	No SVHC above 0.1 wt%

General data

auxiliary contact	No
Colour	grey
Design	for 40mm busbars
Operating altitude	≤ 4000 m
Optical function display	green = OK; red = arrester is defective - replace
Protection degree	IP30 in combination with the cover IP20
Segment	Power distribution
UL 94 flammability rating	V-0
Version	Leakage-current-free

Rated data IEC / EN

Combined pulse U_OC	6 kV
Discharge current I_max (8/20µs) N-PE	100 kA
Discharge current I_max (8/20µs) wire-PE	40 kA
Discharge current I_n (8/20µs) N-PE	80 kA
Discharge current I_n (8/20µs) wire-PE	20 kA
Energy coordination (≤10 m)	Type I Type II Type III
Follow-on current extinguishing capability I_fi	Follow current need not be taken into account
Fuse	No Fuse neccessary ≤160 A gG
Leakage current at U_n	5 µA
Lightning test current I_imp(10/350 µs) (L-PE)	12,5 kA
Lightning test current, I_imp (10/350 µs) (N-PE)	50 kA
Low voltage network	TN-C-S TN-S TT IT with N
Mains voltage	230 V / 400 V
Max. continuous voltage, Uc (AC)	300 V
Max. continuous voltage, Uc (N-PE)	305 V
Number of poles	1
Protection level U_p at I_N (L/N-PE)	≤ 1.5 kV
Protection level U_p at I_N (N-PE)	≤ 1.5 kV
Rated voltage (AC)	240 V
Requirements category acc. to IEC 61643-11	Type I Type II Type III
Requirements class, acc. to EN 61643-11	T1 T2 T3
Response time	≤ 100 ns
Short-circuit current rating I_SCCR	25 kA
Signalling contact	No
SPD type	T1 T2 T3
Standards	IEC 61643-11 EN 61643-11
Temporary surge voltage (over-voltage) - TOV	442 V
Voltage type	AC

Connection data

Wire connection method	Screw connection
Type of connection	Clamped
Tightening torque, max.	4,5 Nm
Clamping range, rated connection	16 mm²
Clamping range, min.	4 mm²
Clamping range, max.	35 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	16 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	25 mm²
Connection cross-section, stranded, min.	16 mm²
Connection cross-section, stranded, max.	35 mm²

Electrical data

Voltage type

General data

Number of poles	1
Protection degree	IP30 in combination with the cover IP20
Colour	grey

Guarantee

Time interval

5 years

Important note

Product information

Only applicable to IT power systems where the earth on the distribution transformer is interconnected with the earth on the consumer side (RE=RA in Figure 44.A1 of IEC 60634-4-44:2018).

Downloads

Approval/Certificate/Document of Conformity	[EU_Konformitätserklärung / EU_Declaration_of_Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_255407)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_310515)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=2830900000)
User Documentation	[Beipackzettel / Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_256177)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC000941
ETIM 7.0	EC000941
ETIM 8.0	EC000941
ETIM 9.0	EC000941
ECLASS 9.0	27-13-08-05
ECLASS 9.1	27-13-08-05
ECLASS 10.0	27-13-08-05
ECLASS 11.0	27-13-08-05
ECLASS 12.0	27-17-90-90
ECLASS 13.0	27-17-90-90
ECLASS 14.0	27-17-90-90