WTZ4 PT100/2 V 0-10V

RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0-10 V

Product ID 8432190000

General ordering data

Version	RTD transformer, PT100, 2-conductor connection, Configurable, Input : Temperature, PT100 (2- wire), Output : 0-10 V
Order No.	8432190000
Type	WTZ4 PT100/2 V 0-10V
GTIN (EAN)	4032248110377
Qty.	1 items
Delivery status	This article will no longer be available in the future.
Available until	30.12.2023
Alternative product	7760054183

Dimensions and weights

Depth	112,4 mm
Depth (inches)	4,425 inch
Width	12,5 mm
Width (inches)	0,492 inch
Length	92,4 mm
Length (inches)	3,638 inch
Net weight	118 g

Temperatures

Storage temperature	-20 °C...85 °C
Operating temperature	0 °C...55 °C

Probability of failure

SIL in compliance with IEC 61508

None

Environmental Product Compliance

RoHS Compliance Status	Compliant with exemption
RoHS Exemption (if applicable/known)	6c, 7a, 7cI
REACH SVHC	Lead 7439-92-1
SCIP	c2a21576-d875-4548-ae68-5e7f85ddf0c7

Input

Number of inputs	1
Sensor	PT100 (2 wire)
Sensor supply	1.45 mA
Temperature input range	Adjustable from -200...+800°C

Output

Load impedance current	≤ 500 Ω
load impedance voltage	≥ 1 kΩ
Number of outputs	1
Output voltage, note	0...10 V

General data

Accuracy	± 0.5 % of measuring range
Configuration	DIP switch Potentiometer and PT100-Simulator
Current consumption	< 38 mA @ I_OUT = 20 mA
Galvanic isolation	Without isolation
Linearity	Yes
Nominal power consumption	0,5 VA
Protection degree	IP20
Rail	TS 35
Temperature coefficient	Measuring range ≥ 200 K: ≤ 200 ppm/K (typ. 80 ppm/K) 100 K <= measuring range <200 K: <250 ppm/K (typ. 100 ppm/K)
Voltage supply	24 V DC ± 20 %

Insulation coordination

EMC standards	EN 55011 EN 61000-6
Galvanic isolation	Without isolation

Connection data

Type of connection	Tension-clamp connection
Stripping length, rated connection	7 mm
Clamping range, rated connection	1,5 mm²
Clamping range, min.	0,5 mm²
Clamping range, max.	2,5 mm²

Important note

Product information

This product will soon be replaced by a new product.
Please do not use with new systems. Please contact our technical support.

Downloads

Approval/Certificate/Document of Conformity	Application notes -- Declaration of Conformity
Engineering Data	CAD data -- STEP
CADENAS eCATALOG	CAX data
Product Change Notification	20220218 Technical change - WAVE series’ signal conditioners WS WZ
User Documentation	Instruction sheet
Catalogues	Catalogues in PDF-format

Classifications

ETIM 6.0	EC002919
ETIM 7.0	EC002919
ETIM 8.0	EC002919
ETIM 9.0	EC002919
ETIM 10.0	EC002919
ECLASS 9.0	27-21-01-29
ECLASS 9.1	27-21-01-29
ECLASS 10.0	27-21-01-29
ECLASS 11.0	27-21-01-29
ECLASS 12.0	27-21-01-29
ECLASS 13.0	27-21-01-29
ECLASS 14.0	27-21-01-29
ECLASS 15.0	27-21-01-29

Tender specification sheets

Long specification

PT100 temperature measuring transformer, configured with DIP switches, 2-wire connection technology
RTD measurement isolating transformer in 12.5 mm width with external power supply,
for transmitting PT100- 2-wire signals.
Input temperature range -200...+800 °C.
Analogue DC signals 0...10 V are available on the output side.
Zero/span compensation with potentiometer.

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 92.4/ 12.5/ 112.4 mm
Tension-clamp connection / Nominal cross-section 1.5 mm²Protection degree: IP 20

Input                         PT100, 2-wire
Output                                             0...10 V
Load resistance > 1 kOhm
Transmission error             < 0,5 % v. E.
                                      typ. 200 ppm / °C
Auxiliary power                                     24 VDC +/- 20 %
Ambient
temperature range 0°C...+55 °C

Isolation                                no electrical isolation
Approvals cULus, CSA