VPUM1I1SXFXV2O1TXPX10
VPUM1I1SXFXV2O1TXPX10
Connection diagram
VPUM1I1SXFXV2O1TXPX10
Connection diagram
VPUM1I1SXFXV2O1TXPX10
VPUM1I1SXFXV2O1TXPX10

VPUM1I1SXFXV2O1TXPX10

Tämä tuote ei ole pian enää saatavana.

Available until: 31.03.2026

Alternative product: 3108220000

Surge protection, 1 MPP, Surge protection II, WM4C, 1000 V

Tuotteen tunnus 2764110000
Lataa tietosivu Product Downloads
Lisävarusteet 19 Vastineet 18 On vastine kohteelle 11 Samankaltaiset tuotteet 12
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Enclosure General data Inputs Surge protection DC side Important note Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Surge protection, 1 MPP, Surge protection II, WM4C, 1000 V 
Order No.
2764110000 
Type
VPUM1I1SXFXV2O1TXPX10 
GTIN (EAN)
4064675014195 
Qty.
1 items
Delivery status
This article will no longer be available in the future. 
Available until
31.03.2026 
Alternative product
[3108220000](~/p/3108220000) 

Dimensions and weights

Depth
91 mm
Depth (inches)
3,583 inch
Height
160 mm
Height (inches)
6,299 inch
Width
168 mm
Width (inches)
6,614 inch
Net weight
678 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Enclosure

Connection type string
Plug WM4C 
Enclosure attachment
Via the four holes under the cover screws 

General data

Protection degree
IP67 
Standards
EN 50539-11 

Inputs

Amount of maximum power points (MPP)
1 MPP
DC Input + & -
  • Wire connection:
    • Type of connection:
      WM4C plug-in connector
  • Cable entry:
    • Number of cable entries:
      1
Functional earth connector
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      PUSH IN
Fuse type
Neither fuse cartridge nor holder 
Number of string inputs per MPP
1 

Surge protection DC side

Conditions and requirements
EN 50539-11 
Discharge current In (8/20 µs)
20 kA 
Discharge current, max. (8/20 µs)
40 kA
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE
1 100 V
Operating height in the grounded PV system
≤ 4000 m 
Operating height in ungrounded PV system
≤ 4000 m 
Protection level Up (+/- , -/PE , +/PE)
≤4,2 kV 
PV system voltage, max. Ucpv
1 100 V
Requirements class
Type II 
Short-circuit curent ISCPV
11 kA
Standards
EN 50539-11 
Total discharge current Itotal ( 8/20µs)
50 kA

Important note

Product information
The SPD in the box cannot be replaced. 

Classifications

ETIM 7.0
EC001457 
ETIM 8.0
EC001457 
ETIM 9.0
EC001457 
ETIM 10.0
EC001457 
ECLASS 12.0
27-17-14-03 
ECLASS 13.0
27-17-14-03 
ECLASS 14.0
27-17-14-03 
ECLASS 15.0
27-17-14-03 

Tender specification sheets

Long specification
Designation 2: VPU PV BOX WM4 II 3 1000 1M Over voltage protection box for inverters with 1 Mpp tracker, used to protect the DC side. Max. String voltage Uoc:1000 V MPPT1: 1 input, connection via WM4 C plug-in connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2069 Connection of the box in stitch without DC switch 1 surge protection type II Connection of functional earth via cable glands (8-12mmØ) cable cross-section: 16mm² Protection class: IP65 and IP67 Plastic enclosure Dimensions HxWxD:168x160x91 mm According to standard, EN 50539-11: 2013+A1:2014 IEC 61643-31: 2018