VPU AC I 2 R 440/25 LCF
VPU AC I 2 R 440/25 LCF
Electric symbol
Schematic circuit diagram

VPU AC I 2 R 440/25 LCF

Surge voltage arrester, Low voltage, Surge protection, with remote contact, Single-phase, TN-S

Produkt ID 2619140000
Åbn i konfiguratoren
Download datablad Engineering-support Produktdownloads
Tilbehør 2 Reservedele 1 Anvendte produkter 6
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Product images Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, Surge protection, with remote contact, Single-phase, TN-S 
Order No.
2619140000 
Type
VPU AC I 2 R 440/25 LCF 
GTIN (EAN)
4050118633993 
Qty.
1 Styk

Dimensions and weights

Depth
93 mm
Depth (inches)
3,661 inch
Height
104,5 mm
Height (inches)
4,114 inch
Width
72 mm
Width (inches)
2,835 inch
Net weight
670 g

Temperatures

Storage temperature
-40 °C...85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Probability of failure

MTBF
15 a

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
Screw connection 
pluggable 
Cross-section for connected wire, solid core, max.
1,5 mm²
Cross-section for connected wire, solid core, min.
0,14 mm²
Stripping length
8 mm

General data

IP20 in installed state 
Colour
black 
Design
Installation housing; 4TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 2000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Segment
Power distribution 
Suitable for
Подсчитывающее устройство (без тока утечки) 
UL 94 flammability rating
V-0 
Version
Surge protection 
with remote contact 

Insulation coordination acc. to EN 50178

Categoría de sobretensión
III 
Grado de polución
2 

Rated data IEC / EN

apropiado para
Count-in installation (leakage current free) 
Contacto de aviso
250 V 1A 1CO 
Corriente de fuga a Un
5 µA
Corriente de prueba Iimp(10/350 µs) (L-PE)
25 kA
Discharge current Imax (8/20µs) wire-PE
100 kA 
Discharge current In (8/20µs) wire-PE
25 kA 
Energy coordination (≤10 m)
Type I 
Type II 
Type III 
Follow-on current extinguishing capability Ifi
Not available due for technical reasons 
Integrated back-up fuse
No 
Követelmény kategória az IEC 61643-11 szerint
Type I 
Type II 
Normas
IEC 61643-11 
EN 61643-11 
Número de polos
3 
Protección por fusible
No Fuse neccessary ≤250 A gG 
Protection level Up at IN (L/N-PE)
≤ 2.5 kV 
Red de baja tensión
Single-phase 
TN-S 
Requirements class, acc. to EN 61643-11
T1 
T2 
Short-circuit current rating ISCCR
50 kA
Sobretensión temporal - TOV
762 V
Tensione permanente massima, Uc (AC)
440 V 
Tensión nominal (AC)
400 V
Tiempo de respuesta / tiempo de recuperación
≤ 25 ns 
Tipo de tensión
AC 
Zona de frecuencia, max.
60 Hz
Zona de frecuencia, min.
50 Hz
Номинальный ток нагрузки IL
100 A
주전압
400 V / 690 V 

Connection data

Stripping length
13 mm
Técnica de conexión de conductores
Screw connection 
Type of connection
Screw connection 
Stripping length, rated connection
13 mm
Tightening torque, min.
2 Nm
Tightening torque, max.
3 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
6 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
6 mm²
Wire cross-section, solid, max.
35 mm²
Wire connection cross section, finely stranded, min.
6 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
6 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
35 mm²
Connection cross-section, stranded, min.
6 mm²
Connection cross-section, stranded, max.
35 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
3 
IP20 in installed state 
Colour
black 

Guarantee

Time interval
5 years 

Important note

Product information
For use in DC applications, please use the fuse of SIBA Type NH2XL aR/aSF DC 1500 V 
Notes
Only applicable to IT power systems where the earth on the distribution transformer is interconnected with the earth on the consumer side (RE=RA in Figure 44.A1 of IEC 60634-4-44:2018). 

Product images

Classifications

ETIM 8.0
EC001457 
ETIM 9.0
EC001457 
ETIM 10.0
EC001457 
ECLASS 14.0
27-17-12-04 
ECLASS 15.0
27-17-12-04